Fast, licensed soot cleanup for homes and businesses across PACOIMA

Soot Removal in PACOIMA, California That Stops the Smell and the Stain

Soot Removal in PACOIMA, California is the job that decides whether your house smells like a fire for months or gets back to normal in days. We pull soot off walls, ceilings, framing, and ductwork, then treat the air so the odor doesn't come back. If you're searching for soot cleanup in PACOIMA after a kitchen fire, attic fire, or electrical burn, call (833) 929-6186 and we'll get a crew moving.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Soot Removal you can count on
Careful work. Honest options.
About this service

What Soot Removal in PACOIMA, California Really Involves

Soot Removal in PACOIMA, California is the controlled process of removing acidic combustion residue from every surface it touched, then neutralizing the odor source so it can't recontaminate the space. Soot isn't just black dust. It's a mix of carbon, oils, and chemicals that etch paint, pit chrome, and eat into drywall within days. We start with an IR thermal camera and boroscope inspection camera to map where the residue traveled, then HEPA vacuum the loose layer before any wet cleaning touches a surface.

In PACOIMA, most soot calls come from kitchen grease fires, attic wiring fires, and older homes where a small burn spreads residue through the whole HVAC system. We see it constantly in the Van Nuys Boulevard Corridor and Pacoima Boulevard District, where 1950s and 1960s houses share tight return-air paths. If you need soot cleanup PACOIMA California homeowners can trust after a fire, we document every room, set up negative air machines, and keep the rest of the house from cross-contaminating while we work.

  • ✓ Stops Odor at the Source
  • ✓ Protects Surfaces From Etching
  • ✓ Cleans the Air You Breathe
  • ✓ Keeps Your Claim Documented
What's included

What Our Soot Removal Service Includes

Every soot removal job starts with an assessment and ends with a walkthrough. Here's what's covered in a standard scope, and what we quote separately if your property needs it.

✓

Room-by-Room Assessment

We inspect every room with an IR thermal camera and moisture meter, photograph the damage, and map where the residue traveled. You get a written scope and price before any work starts, including rooms that look clean but aren't.

✓

Containment and HEPA Filtration

Doorways and vents get sealed, and negative air machines plus HEPA air scrubbers run for the duration. This keeps soot from spreading into clean rooms and protects your family from breathing fine ash during the job.

✓

Surface Cleaning and Deodorization

Walls, ceilings, cabinets, and framing are cleaned with soot sponges and surface-matched chemicals, then treated with thermal fogging or a hydroxyl generator. Odor counteractant reaches the cavities that wiping can't.

✓

HVAC and Duct Treatment

Smoke travels through return-air paths, so we inspect and clean the HVAC system and treat the ductwork. This is the step most homeowners skip, and it's the reason smoke smell comes back weeks later when the heat kicks on.

✓

Insurance Documentation

We log photos, moisture readings, and a room-by-room scope, then send the file to your adjuster. You get a copy too. This documentation is what keeps a claim moving instead of stalling on questions about what was damaged.

✓

Final Air Test and Walkthrough

Before we pack up, we run a final HEPA pass, check moisture levels, and walk the property with you. If anything still reads high or smells off, we address it before we leave. No job is closed until you've signed off.

How it works

How Our Soot Removal Process Works

01

Emergency Assessment

We arrive, walk the property with you, and use an IR thermal camera plus moisture meter to find hidden residue and water from firefighting. You get a written scope and an upfront price before we touch anything. Most assessments take 45 to 90 minutes.

02

Containment and Air Control

We seal doorways and vents with plastic and zip walls, then set negative air machines so soot can't drift into clean rooms. HEPA air scrubbers run the whole time. This is the step that keeps a kitchen fire from turning into a whole-house cleaning job.

03

Dry Removal and HEPA Vacuuming

Loose soot comes off first with HEPA vacuums and soft brushes. We don't wet a surface until the dry layer is gone, because wetting soot turns it into a smear you can't undo. Techs work top-down, room by room, logging progress as they go.

04

Surface Cleaning and Deodorization

Walls, ceilings, cabinets, and framing get cleaned with soot sponges and char removal chemicals matched to the surface. Then we run thermal fogging or a hydroxyl generator to neutralize odor in cavities and ductwork. This is where the smoke smell actually dies.

05

Final Air Test and Walkthrough

We run a final HEPA pass, check moisture levels, and walk the property with you room by room. If anything still reads high on the moisture meter or smells off, we address it before we pack up. You get the documentation file the same day.

Tools & methods

Tools and Methods We Use for Soot Removal

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

HEPA air scrubbers and negative air machines

Run continuously during the job to trap fine ash and keep soot from drifting into clean rooms. Essential for air quality and cross-contamination control.

IR thermal camera and boroscope inspection camera

Find hidden residue and moisture behind walls and in cavities before we start cleaning. This is how we catch damage that looks invisible from the room.

Dry ice blasting equipment

Lifts soot from framing and hard surfaces without water or abrasive damage. Ideal for attic framing and areas where wet cleaning would cause more harm.

Thermal fogger and hydroxyl generator

Reach the cavities and ductwork that wiping can't. The fog and hydroxyl radicals neutralize odor at the source instead of masking it.

Soot sponges and chemical sponges

Lift dry residue from walls and ceilings without smearing it deeper. Matched to the surface so paint and drywall stay intact.

Dri-Eaz and Phoenix Restoration Equipment air movers and dehumidifiers

Dry the water left behind by firefighting before mold can start. Built for 24/7 run times during a multi-day job.

Moisture meter

Logs readings before and after drying so we can prove the structure is dry. The same readings go into your insurance file.

Real results

Before and after.

Kitchen Grease Fire, Pacoima Village

Before

A grease fire had coated the cabinets, hood, and ceiling with sticky black soot. The smell had spread into the living room and bedrooms, and the homeowner was ready to replace the cabinets.

After

We degreased and cleaned every surface, treated the kitchen and adjacent rooms with a hydroxyl generator, and cleaned the HVAC system. The cabinets were saved, and the home passed the final air test in three days.

Attic Wiring Fire, Hansen Hills

Before

An attic wiring fire sent soot down through the insulation and ceiling penetrations. The attic framing was coated, the old insulation was contaminated, and the smell was reaching the bedrooms below.

After

We removed the contaminated insulation, cleaned the framing with dry ice blasting and HEPA vacuums, and treated the whole cavity. New insulation went in after the final air pass, and the bedrooms below were cleaned and sealed.

Electrical Fire, Van Nuys Boulevard Corridor

Before

A small electrical fire in a restaurant closed the dining room before the dinner rush. Soot had settled on the kitchen surfaces and drifted into the dining area, and the owner was worried about losing weekend revenue.

After

We worked after hours, contained the affected zone, cleaned and deodorized the kitchen and dining room, and treated the HVAC system. The restaurant reopened in 48 hours with a documented claim file for the commercial carrier.

Problems we solve

Soot Problems We Solve for PACOIMA Properties

Soot damage isn't just cosmetic. Left alone, it etches surfaces, ruins air quality, and turns a small fire into a full remodel. Here's what we fix.

Ask a pro →
01

Smoke odor lingering in HVAC systems

We inspect the HVAC system, clean the accessible ductwork, and treat it with thermal fogging or a hydroxyl generator. The odor counteractant reaches the same paths the smoke did, so the smell stops cycling back into your rooms.

↗
02

Soot staining on walls and ceilings

Our techs use chemical sponges and dry ice blasting equipment to lift residue without smearing it. On light-to-moderate staining, we clean and apply an encapsulant sealant so you keep the original finish instead of repainting.

↗
03

Water damage from firefighting efforts

We set air movers and dehumidifiers the same day we start soot removal. Moisture meter readings are logged before and after, so the structure is dry before we close the job and mold never gets a foothold.

↗
04

Air quality contamination

HEPA air scrubbers and negative air machines run continuously during the job, trapping particles down to 0.3 microns. We don't remove containment until the final air pass reads clean.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Odor Control Technician (OCT)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
OSHA 10-Hour Construction SafetyOccupational Safety and Health Administration
✓
California Contractors State License Board (CSLB) LicenseCalifornia Contractors State License Board
Good questions

Soot Removal Questions PACOIMA Homeowners Ask

(833) 929-6186 →

Most residential soot removal jobs in PACOIMA run $450 to $3,200 in 2026, depending on square footage and how far the residue spread. A single kitchen or bedroom typically lands at the low end; whole-house jobs with HVAC contamination sit higher. We give you a written price after the assessment, and we bill insurance directly when coverage applies.

Fire Damage Restoration Pacoima does, and we're reachable at (833) 929-6186 around the clock. We're a licensed, insured crew based in the Valley, not a national call center that dispatches a stranger. We handle residential and commercial soot cleanup, document the job for your insurer, and walk the property with you before we leave.

Yes, in most cases. Standard homeowners policies cover sudden fire and smoke damage, including soot cleanup, and we've worked with every major carrier. We photograph the damage, log moisture readings, and send the file to your adjuster. You still pay your deductible, but the cleaning and deodorization usually fall under the claim.

Often, yes, if we get there within 48 to 72 hours. Soot sponges and chemical sponges lift light-to-moderate residue without damaging paint, and an encapsulant sealant locks in any remaining stain. Heavier residue or etched drywall needs a primer coat, and we'll tell you honestly which category your walls are in during the assessment.

Ready when you are

Get Soot Removal in PACOIMA, California Started Today

Soot damage gets worse by the hour, and the smell settles deeper the longer it sits. Call (833) 929-6186 and we'll schedule an assessment, give you a written price, and get a crew moving. Licensed, insured, and available 24/7.

Call Now (833) 929-6186 →
Request an appointment

Get Fire Damage Restoration in PACOIMA

Call (833) 929-6186 any time, day or night. A live person answers, takes your address and gives you an arrival window. If you prefer email, send the details to info@firedamagerestorationpacoima.com and we will respond the same day. Emergencies get priority dispatch.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186